De-Oil-It disassembles and transforms hydrocarbons (oils, fuels, etc.) into basic elements

Bio-Degrade-It specializes in hydrocarbons

Bio-Degrade-It is an exceptional hydrocarbon cleaner and is regarded as a DEGRADER. A degrader is far superior than a degreaser or ordinary detergent. Degreasers, soaps, detergents, solvents, etc. clean by attaching to the hydrocarbon (fuel, oil, etc.) essentially just moving the contamination from one place to another requiring further hazmat handling, costs and time; a degrader on the other hand disassembles and then transforms hydrocarbons into a detoxified, simpler chemical structure, thereby being much more environmentally responsible and safe. Best of all De-Oil-It can be used “in-situ”, meaning the spill treatment can be done on site without necessarily the need to move contaminated soils somewhere else for treatment. On water, if approved by FOSC (“Federal On-Scene Coordinator”), Bio-Degrade-It can be applied surrounding the spill (to contain and prevent further spreading of an oil slick), plus broadcasted (usually sprayed or pumped) on top of the soil slick to enhance remediation processes by breaking down (“degrading”) the hydrocarbon pollution.

Note: “detoxified” claim based on hydrocarbon measuring equipment producing Parts per Million, PPM, to quantify contamination levels. Bio-Degrade-It has been used to reduce hydrocarbon contamination (“pollution”) to below regulated levels to nearly negligent levels. Detoxification (“reducing hydrocarbon PPM levels”) is based on data from 350+ remediation projects, many supervised by the EPA. These projects were conducted mainly in Texas, on land, and averaged 4-6 weeks versus conventional remediation timelines of 3-4 months. Note on water the initial reaction to broadcasting Bio-Degrade-It on the oil slick will be as a oil control agent meaning the reacted materials remain on top of the water; Bio-Degrade-It initially in this oil control agent action does not introduce degraded reacted materials into the water column; this would take longer than 3 days and extra product application to more fully degrade an oil slick only if a FOSC permits this action.

Bio-Degrade-It breaks down complex hydrocarbon chemical structures up to C40.

Water “activates” BIO-DEGRADE-IT as the ingredients utilizes H2O to disassemble the hydrocarbon chain (oil, fuel, hydraulic, etc.).

BIO-DEGRADE-IT, activated by H20, dissembles the hydrocarbon chain, into smaller, simpler chemical compounds greatly reducing the toxicity of the original contaminant (oil, fuel, hydraulic, etc.)

Degreasers soaps detergents solvents, etc. have a propensity to form weak bonds when attaching to oil and fuel (hydrocarbons); theBIO-DEGRADE-IT technology forms strong bonds such that the disassembled smaller molecular structures will not reattach and form another hydrocarbon structure! Weak bonds is a major factor contributing to coalescence (i.e reforming hydrocarbon structure from two or more smaller previously broken down compounds); BIO-DEGRADE-IT on the other hand is known to cap degraded smaller, simpler hydrocarbon structure on each end that will prevent rejoining of these degraded compounds.

BIO-DEGRADE-IT is non-hazardous, removes flash point (no fire, no more odors), while also disassembling large complex hydrocarbon chains into elementary soluble carbon, hydrogen and oxygen.

BIO-DEGRADE-IT is not a dispersant, rather BIO-DEGRADE-IT is a miscellaneous oil spill control agent (the category we have submitted to the EPA’s NCP – “National Contingency Plan” list.) BIO-DEGRADE-IT enhances oil spill cleanup; either by being part of a larger process, possibly in coordination with an accelerant such as enzymes or extra bacteria introduced in addition to existing indigenous bacteria.

While we regard BIO-DEGRADE-IT as a tool that enhances other hydrocarbon cleaning processes and solutions, such as an oil control agent;
BIO-DEGRADE-IT has a long history of being used on it’s own merit as the only cleaning solution for residential, industrial, and large scale remediation projects that did not require EPA regulations (meaning not on navigable waters, or a large spill on land).

Fuels of all kind such as gasoline, diesel, kerosene, aviation, etc. are no match for BIO-DEGRADE-IT, which instantly decomposes and eradicates fuels. BIO-DEGRADE-IT can act as a fire extinguisher or as a fire prevention around fuel spills as BIO-DEGRADE-IT eliminates flash point (spill will not catch fire), and removes odor (fuel vapor is highly flammatory / explosive, and toxic to breathe in)

What’s the big buzz about BIO-DEGRADE-IT?

BIO-DEGRADE-IT detoxifies hydrocarbon contamination below regulated levels or down to negligent pollution detected. 

BIO-DEGRADE-IT keeps working even after being washed away keeping run-off water safe, and preserving the ecosystem affected by the run-off. 

Is your cleaning solution this environmentally responsible ??

Download this MOV extension file to see a simple De-Oil-It demonstration Contact us if you cannot view this MOV file, MP4 version is too large for WordPress to manage, we can send a DropBox copy of MP4 if necessary

Download a copy of our DILUTION GUIDE
Note: When treating oil / fuel spills on Navigable waters FOSC approval is required when using a product like De-Oil-It (Federal On-Scene Coordinator)
Download a copy of our PERFORMANCE CHART

Ready To Use Formula – “RTU”

Our ready to use formula is prepared to just APPLY, SOAK, RINSE… Ready to Use containers have an unlimited shelf life as long as you keep the product capped.

We suggest soaking at least 15 minutes to allow the BIO-DEGRADE-IT solution to degrade the hydrocarbon contamination (the longer you wait the more complex chemical structures are dissembled into smaller, simpler, and far less toxic formats); the longer the soaking time the more degrading can occur.

We offer Ready-to-Use in 22oz, 1 gal, 2.5 gal, 5 gal, 55 gal, and 275 gal sizes (pictured below is 1 gallon, 5 gallon, and 22 oz spray bottle).

Products 2

Industrial Strength Concentrate – “ISC”

Industrial Strength Concentrate is perfect forthe hard to clean or larger spills of oil, fuel, etc. In many cases ISC will be more economic than RTU because you can dilute to many ratios specific to your task at hand.

Use our dilution guide to add water in a ratio recommended for your task (H2O activates BIO-DEGRADE-IT); there is an unlimited shelf life of the concentrate formula, and the activated dilution is also unlimited as long as the container is capped.

Use our CONTACT US form to describe your project and we can help explain the dilution guide if you have questions or we can provide you a HOW TO guide on remediation or many other kinds of hydrocarbon cleaning needs.

We offer industrial concentrate blend in 5 gallon, 55 gallon and 275 gallon sizes..

Indus Concen 5

Buy Now…

Request a quote for large volume orders at

Or for smaller quantities you can purchase BIO-DEGRADE-IT at this website Tampa Bay Yacht Masters



  • Fuels : gasoline, diesel, kerosene (heating and aviation quality), etc.
  • Hydraulic, transmission (ATF), brake, power steering fluids
  • Oil : raw / crude, refined, processed
  • TCE  –  Tricloroethylene
  • PCB  –  Polychlorinated Bi-Phenyls
  • PAH  –  Polycyclic Aromatic Hydrocarbons
  • Benzene, Xylene, Toluene, Glycols, pesticides

See a full list of what these elements are and why they are important to be cleaned in a manner that Bio-Degrade-It protects the environment.


Exposure Guidelines and Health Hazards
HMIS and NFPA ratings list “slight” hazard; relative to other materials this product is classified as “relatively non-toxic” concerning ingestion, thoroughly rinse eyes with fresh water. No warning labels required under NFPA 704. Not irritating to skin. Inhalation hazard is very low, mechanical ventilation not required but recommended. OSHA Hazard 29 CFR 1910.1200 lists as very low to none health issue. HMIS = Hazardous Materials Identification System. NFPA = National Fire Protection Association – note product will not flash, is non-flammable and is suitable material for surrounding fire conditions (i.e. can be used as a fire extinguisher)

Disposal Consideration
Considering reacted materials with applied BIO-DEGRADE-IT, when applied properly this product is NOT a HAZARDOUS WASTE under RCRA 40 CFR 261. The Resource Conservation and Recovery Act (RCRA) is the public law that creates the framework for the proper management of hazardous and non-hazardous solid waste. The law describes the waste management program mandated by Congress that gave EPA authority to develop the RCRA program. The EPA is critically involved on navigable waters and developed the NCP (National Contingency Plan), to this regard BIO-DEGRADE-IT has been submitted for inclusion on the NCP list as a Miscellaneous Oil Control Agent; as such, on water, BIO-DEGRADE-IT in contact with an oil slick will prevent reacted materials from sinking, in other words BIO-DEGRADE-IT will maintain an emulsified layer on top of the water; however, we recommend removal of the reacted materials within 3 days otherwise the product will start to naturally degrade the layer. BIO-DEGRADE-IT does not form emulsified layers of fuels and other non-oils on water; instead there is rather immediate degrading of this kind of substrate.

Empty Container Disposal
Empty BIO-DEGRADE-IT containers retains product residue; observe all hazard precautions. Do not reuse for other purposes except for storage of excess BIO-DEGRADE-IT or to use for blending water and BIO-DEGRADE-IT for another application. Proper disposal at a waste site accepting used containers is recommended and follow Federal, state, and local regulations

Ecological Information
BIO-DEGRADE-IT RTU and ISC formulas do have a product toxicity, but when applied correctly to hydrocarbons and activated with water the end result can be significantly reduced to negligent levels of contamination measured in PPM (Parts per Million) by instrumentation such as can be obtained by Hanby Electronics. When properly treated there is minimal to non ecological danger concerning the reacted materials degraded to levels we have observed and closed reports from relatively large land remediation projects (call to discuss). The toxicity that we speak of is measured by Bio-Aquatic laboratories, one of a few EPA / NCP list qualifying labs; the De-Oil-It measurements of LD50 are in the following table (De-Oil-It by itself relative to other products on NCP list is medium, but the readings of De-Oil-It and Fuel with living organisms is very low relative to other products on NCP list)

Data available concerning ecotoxicity has not concluded environmental hazards when properly applied; bioaccumulation potential according to experience is not expected. Toxicity of concentrate is significantly reduced when diluted and applied as required according to our square foot coverage or formulas for remediation (call to obtain formulas for remediation). De-Oil-It has been used extensively outside the USA with less regulations where no toxicity issues have been reported. Typically when applied correctly PPM readings after treatment have been well under guidelines, regulations, to negligent levels.

Regulatory Information
All BIO-DEGRADE-ITconfidential ingredients are listed on the TSCA Chemical Substances inventory; TSCA = Toxic Substance Control Act 40 CFR 710; De-Oil-It therefore complies with these guidelines.

BIO-DEGRADE-IT does not contain any chemicals subject to reporting requirements under CERCLA, SARA, and California Proposition 65. CERCLA stands for the Comprehensive Environmental Response, Compensation, and Liability Act, known also as Superfund. It was passed in 1980 in response to some alarming and decidedly unacceptable hazardous waste practices and management going on in the 1970s. The Superfund Amendments and Reauthorization Act SARA amended CERLA act of 1980 (CERCLA) on October 17, 1986 – SARA mandates every facility using or storing hazardous chemicals; De-Oil-It complies with SARA Title III, 355, 370, 372 regarding hazardous notifications due each March 1; De-Oil-It does not contain any chemical that needs to be reported to SERC (State Emergency Response Commission), LEPC (Local Emergency Planning Committee), or local firefighters. As such De-Oil-It is regarded as non-hazardous. California Proposition 65 lists chemicals requiring warnings concerning causing cancer; the ingredients of De-Oil-It do not appear on this list. Non-Hazardous declaration is also supported by WHMIS (Workplace Hazardous Materials Information System) created in 1988 to give employers and workers warning information (decals required) concern hazardous products or chemicals they may be exposed at work.

For Canada, the chemical ingredients in De-Oil-It are not contained in DSL (Domestic Substance List) nor NDSL (Non-Domestic Substance List); these lists ensure products comply with product labeling and usage warning if hazardous; De-Oil-It is non-hazardous in this regard and does not require any specific product / usage warnings than than standard precautionary measures one might take such as safety googles, ventilation as desired, if excess application solution does make contact with eyes flush with fresh water. No special requirements such as clothing, gloves, etc. is required.


Disclaimer: Chemical countermeasures (“cleaning”) oil and fuel spills on navigable waters must be authorized by a Federal On-Scene Coordinator (FOSC). If you witness, caused, or are effected by an oil / fuel spill please contact appropriate personnel as the public at large is not authorized to initiate or take on (“countermeasures”) a reportable spill according to the EPA.

For your reference CFR 40 (“Code of Federal Regulations) to determine responsibilities concerning oil and hazardous substance pollution.

Report oil and fuel spills to the marina office and the U.S. Coast Guard National Response Center 800.424.8802 and Office of Emergency Services in your jurisdiction immediately. The NRC is the federal government’s centralized reporting center, which is staffed 24 hours per day by U.S. Coast Guard personnel.

Report unusually large spills that enter or have potential to enter the storm drain system or a water body to your local authorities including the Regional Water Board and the Department of Fish and Game (800-852-7550 OES). Please also contact appropriate resources we have listed if you expect spills or spill cleanup that has the potential for water run-off into navigable waters, or have witnessed this scenario.

We are asked many times can De-Oil-It be used in navigable waters for oil spill cleanup if we are not yet on the NCP list; the short answer is it depends and the people responsible for a possible use of a product not on the NCP list resides with FOSC and EPA. For CFR 40 regulations on use of non-NCP list products see this document.

Learn more about emergency spills and the role of EPA in these situations, who’s who, etc.

We are pursuing inclusion into the NCP list and will report updates when available.
If / When De-Oil-It is placed on the U.S. Environmental Protection Agency’s NCP Product Schedule, i.e. “NCP list”. This listing does NOT mean that EPA approves, recommends, licenses, certifies, or authorizes the use of De-Oil-It on an oil discharge. This listing means only that data have been submitted to EPA as required by subpart J of the National Contingency Plan, §300.915.

This website was last updated Nov 28, 2020; archived De-Oil-It pages are regarded as obsolete. All content and questions about the product, this website, etc. can be addressed by Danny Schillaci

Are you interested in helping to direct optimal methods, best practices applying environmentally responsible products; then consider donating to the 501 c 3 organization Greenworld Environmental Alliance dedicated to this mission. Certain donor levels help to determine, focus, direct, participate plus receive data concerning both GEA testing and field observations of live remediation projects.